# Add new docs is not working or configuration issue?

**URL:** <https://forum.cursor.com/t/add-new-docs-is-not-working-or-configuration-issue/17774>\
**Category:** Help\
**Created:** [September 20, 2024, 9:58am UTC](https://forum.cursor.com/t/add-new-docs-is-not-working-or-configuration-issue/17774 "2024-09-20T09:58:17Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![litecode](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/litecode/32/2966_2.png) [@litecode](https://forum.cursor.com/u/litecode)\
**Post date:** [September 20, 2024, 9:58am UTC](https://forum.cursor.com/t/add-new-docs-is-not-working-or-configuration-issue/17774/2 "2024-09-20T09:58:58Z")

</div>

Hi @christophebe ,

Have you seen this?

> The docs that Cursor can see out-of-the-box.
> 
> What is this repo?
> 
> In Cursor, you can show GPT-4 project documentation to improve it’s answers with @ commands like @Langchain and @Tokio. You can also spawn our crawler to add your own documentation by typing “@Add” in chat.
> 
> This repo is the list of documentation that’s available for all users of Cursor with no “@Add” command required.

[https://github.com/getcursor/crawler](https://github.com/getcursor/crawler)

You can add entries to [this JSON file](https://github.com/getcursor/crawler/blob/main/docs.jsonl) and submit a pull request for them to be considered to be included in the available docs.

I can see Langchain and NextJS are in there, I can’t see Vercel though.

For reference, here is a post that shows how it looks when docs are added successfully to Cursor via the `Cursor Settings` \> `Features` area:

> [@Using docs in Cursor projects: How to use the @mention feature?](https://forum.cursor.com/t/using-docs-in-cursor-projects-how-to-use-the-mention-feature/13538/6):
>
> Hi @doss , I thought it might have given you some ‘behind-the-scenes’ insight into how the [Docs symbol](https://docs.cursor.com/context/@-symbols/@-docs) was working, and what URL syntax (and crawlerStart and crawlerPrefix values) were being used for the other ‘out-of-the-box’ docs. Apologies if that wasn’t useful information. Out of interest, what specific values are you putting in for the: Prefix Entrypoint Below are some screenshots of what I see when I add some Docs in Cursor Settings \> Features: Screenshot 01 - Adding new docs [add\_…

And also for reference, in case you haven’t seen it:

[https://docs.cursor.com/context/@-symbols/@-docs](https://docs.cursor.com/context/@-symbols/@-docs)

Any relevant info you could grab from following [these troubleshooting steps](https://docs.cursor.com/troubleshooting/troubleshooting-guide) might also assist in resolving your particular issue.

---

_[View the full topic](https://forum.cursor.com/t/add-new-docs-is-not-working-or-configuration-issue/17774)._