# How to Continue When 25 Tool Call Limit is Reached

**URL:** <https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836>\
**Category:** Help\
**Created:** [March 12, 2025, 7:58am UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836 "2025-03-12T07:58:09Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![wmxl](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/wmxl/32/15250_2.png) [@wmxl](https://forum.cursor.com/u/wmxl)\
**Post date:** [March 12, 2025, 7:58am UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/1 "2025-03-12T07:58:09Z")

</div>

When Cursor notifies me with:

_“Note: we default stop the agent after 25 tool calls. Please ask the agent to continue manually.”_

What should I say to resume the task? Would “continue this task” work, or is there a better command?

Also, I’d love to see an option to set a custom limit or even allow unlimited tool calls. Is this something that could be added in the future?

---

<div class="post-metadata">

**Author:** ![condor](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/condor/32/73148_2.png) [@condor](https://forum.cursor.com/u/condor)\
**Post date:** [March 12, 2025, 9:44am UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/2 "2025-03-12T09:44:55Z")

</div>

Old Cursor version (pre 0.46) had. this. you can write: continue.  
Newer cursor versions 0.46+ have an option right under the chat output to resume.

Both options cost a request (same amount as the initial request, since you continue with detailed steps). The actual request count will depend on the model you used. see Models in Cursor Docu.

> **[Cursor – Models](https://docs.cursor.com/settings/models)**
>
> Switch between AI models in Cursor using Chat, Composer, Tab, or Agent with different pricing tiers

---

<div class="post-metadata">

**Author:** ![mrmuminov](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/mrmuminov/32/35615_2.png) [@mrmuminov](https://forum.cursor.com/u/mrmuminov)\
**Post date:** [March 12, 2025, 12:16pm UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/3 "2025-03-12T12:16:48Z")

</div>

Can I exceed this limit (25 tool calls)?

---

<div class="post-metadata">

**Author:** ![condor](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/condor/32/73148_2.png) [@condor](https://forum.cursor.com/u/condor)\
**Post date:** [March 12, 2025, 1:28pm UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/4 "2025-03-12T13:28:36Z")

</div>

No, as the docu shows and the Cursor IDE tells you to. You can continue/resume the process.

---

<div class="post-metadata">

**Author:** ![xuzhiping7](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/xuzhiping7/32/10104_2.png) [@xuzhiping7](https://forum.cursor.com/u/xuzhiping7)\
**Post date:** [March 13, 2025, 6:29am UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/5 "2025-03-13T06:29:13Z")

</div>

how to let cursor automatically continue ?

---

<div class="post-metadata">

**Author:** ![condor](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/condor/32/73148_2.png) [@condor](https://forum.cursor.com/u/condor)\
**Post date:** [March 13, 2025, 11:18am UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/6 "2025-03-13T11:18:48Z")

</div>

you click on “Resume” in the chat or if your version is older and does not have that, then you can type new message ‘continue’ or similar.

---

<div class="post-metadata">

**Author:** ![xuzhiping7](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/xuzhiping7/32/10104_2.png) [@xuzhiping7](https://forum.cursor.com/u/xuzhiping7)\
**Post date:** [March 13, 2025, 11:40am UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/7 "2025-03-13T11:40:47Z")

</div>

i mean automatically , like an option ,or api that i can set to resume or continue to automat continue ~

some task may last long time and many action,it often reach the limitation

---

<div class="post-metadata">

**Author:** ![tom50334](https://avatars.discourse-cdn.com/v4/letter/t/d26b3c/32.png) [@tom50334](https://forum.cursor.com/u/tom50334)\
**Post date:** [March 31, 2025, 3:48am UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/8 "2025-03-31T03:48:44Z")

</div>

I guess we would need to build an other cursor on top of cursor to press that button automatically? ..

---

<div class="post-metadata">

**Author:** ![condor](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/condor/32/73148_2.png) [@condor](https://forum.cursor.com/u/condor)\
**Post date:** [March 31, 2025, 3:56am UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/9 "2025-03-31T03:56:48Z")

</div>

And then someone sets that setting and complains that cursor charged and never stopped 🙂

But yes some kind of Auto-run Resume setting (with a clear max repeat count) would be reasonable for advanced users.

The completion sound helps actually a lot if one doesnt want to keep watching Cursors activity in that window.

---

<div class="post-metadata">

**Author:** ![condor](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/condor/32/73148_2.png) [@condor](https://forum.cursor.com/u/condor)\
**Post date:** [March 31, 2025, 3:57am UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/10 "2025-03-31T03:57:27Z")

</div>

See also

> [@Increase the 25 tool calls limit](https://forum.cursor.com/t/increase-the-25-tool-calls-limit/72553):
>
> During refactoring it happens all the time but happens very frequently during regular development as well. It’s highly annoying having to babysit the agent.

---

<div class="post-metadata">

**Author:** ![sshimomu2k2](https://avatars.discourse-cdn.com/v4/letter/s/e9c0ed/32.png) [@sshimomu2k2](https://forum.cursor.com/u/sshimomu2k2)\
**Post date:** [April 26, 2025, 6:20am UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/11 "2025-04-26T06:20:38Z")

</div>

can you just add a switch in full-auto-run mode in feature section of Cursor setting so that if this is checked it will automatically continue forever? it is really annoying…

---

<div class="post-metadata">

**Author:** ![kosa5](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/kosa5/32/29896_2.png) [@kosa5](https://forum.cursor.com/u/kosa5)\
**Post date:** [April 26, 2025, 10:56pm UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/12 "2025-04-26T22:56:07Z")

</div>

I wish they had something like that…I am having the same problem here

---

<div class="post-metadata">

**Author:** ![trungbui2000](https://avatars.discourse-cdn.com/v4/letter/t/f08c70/32.png) [@trungbui2000](https://forum.cursor.com/u/trungbui2000)\
**Post date:** [June 9, 2025, 5:20am UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/13 "2025-06-09T05:20:56Z")

</div>

Not quite sure who on the Cursor team marked the topic as resolved. I am still running into this issue. I would like to have a setting that automatically bypass the 25 tool call limit so I do not have to babysit Cursor by pressing resume. This is a bad Dev Experience to have to do that. Is there a timeline to automatically configure a set limit instead of the arbitrary 25 tool calls limit?

---

<div class="post-metadata">

**Author:** ![condor](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/condor/32/73148_2.png) [@condor](https://forum.cursor.com/u/condor)\
**Post date:** [June 9, 2025, 5:39am UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/14 "2025-06-09T05:39:55Z")

</div>

@trungbui2000 Hi and welcome to the forum.

The question of “How to continue…” was answered.

There is a separate feature request for increasing the tool call limit.

Currently MAX mode supports 200 tool calls, as the larger size of the MAX mode context allows more information to be passed in the call to AI.

> [@Increase the 25 tool calls limit](https://forum.cursor.com/t/increase-the-25-tool-calls-limit/72553/35):
>
> Sorry

---

<div class="post-metadata">

**Author:** ![Frulfump](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/frulfump/32/39754_2.png) [@Frulfump](https://forum.cursor.com/u/Frulfump)\
**Post date:** [June 9, 2025, 7:45am UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/15 "2025-06-09T07:45:36Z")

</div>

The tool call limit is not related to the context size, GitHub Copilot allows an arbitrary limit configured by the user. You make it sound like it’s related which is false.

The tool calls are not aggregated or anything like that it’s just an arbitrary limit set for the number of tool calls allowed in sequence without manual interruption.

---

<div class="post-metadata">

**Author:** ![condor](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/condor/32/73148_2.png) [@condor](https://forum.cursor.com/u/condor)\
**Post date:** [June 9, 2025, 8:43am UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/16 "2025-06-09T08:43:10Z")

</div>

Hey, you’re right that other tools may have different config but what happens in background is not visible to user.

Tool calls do affect context, in size and may affect accuracy of AI responses as they fetch or send information. So its not like there is no impact. At some point, accumulated tool call data can actually confuse the AI with information thats not relevant to the current task.

The API providers (Anthropic, Gemini, OpenAI) typically allow one tool call per API request. Cursor’s orchestration combines multiple calls, and each tool call, third-party or internal, requires preparation, processing, and response handling that factors into the overall request cost. So both context and cost have an affect.

I would like to see configurable limits too, thats why I also linked the feature request! The more people request this the more will this be noticeable.

The OP’s original question about how to continue has been answered.

---

<div class="post-metadata">

**Author:** ![Frulfump](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/frulfump/32/39754_2.png) [@Frulfump](https://forum.cursor.com/u/Frulfump)\
**Post date:** [June 9, 2025, 8:50am UTC](https://forum.cursor.com/t/how-to-continue-when-25-tool-call-limit-is-reached/62836/17 "2025-06-09T08:50:08Z")

</div>

Hey!

Dan Perks from Cursor commented this

> [@Increase the 25 tool calls limit](https://forum.cursor.com/t/increase-the-25-tool-calls-limit/72553/16):
>
> Hey all!
> 
> This limit was put in place to avoid the agent getting itself into a loop, and using up a ton of tool calls not doing a lot, but you can always click continue if you hit the 25 tool call limit, and it’ll carry on from where it was (and use another premium request!).

With no mention of context. I mean a tool call will add to context but it doesn’t add more if you have more of them executed in sequence than if you would do one at a time. If it would take another request just to deal with some internal limitation people would be fine with that.

Yeah it’s good if we can drive everyone to that one Feature request, sadly it looks like it’s hidden from the search and not shown under total votes.

> [@Increase the 25 tool calls limit](https://forum.cursor.com/t/increase-the-25-tool-calls-limit/72553/58):
>
> Why is this feature request hidden when doing this search query?  
> [Search results for 'Increase the 25 tool calls limit' - Cursor - Community Forum](https://forum.cursor.com/search?q=Increase%20the%2025%20tool%20calls%20limit)  
> And as I mentioned earlier  
> " This feature request no longer shows up under [Feature Requests - Cursor - Community Forum](https://forum.cursor.com/c/feature-requests/5/l/latest?order=votes) hmm."
> 
> It also doesn’t show under [Feature Requests - Cursor - Community Forum](https://forum.cursor.com/c/feature-requests/5/l/top?period=all)
> 
> sus!

Yeah seems like the original question is answered

And this gives some hope

> [@Increase the 25 tool calls limit](https://forum.cursor.com/t/increase-the-25-tool-calls-limit/72553/21):
>
> Will feed this back to the team, we may be at a point where the risk of a loop is low enough to allow people to opt-in to higher limits!
