# Plan mode on My Machines worker: empty plan + “Unable to reconnect workspace”

**URL:** <https://forum.cursor.com/t/plan-mode-on-my-machines-worker-empty-plan-unable-to-reconnect-workspace/170591>\
**Category:** Bug Reports\
**Tags:** remote-control, plan-mode, networking\
**Created:** [September 4, 2026, 1:28pm UTC](https://forum.cursor.com/t/plan-mode-on-my-machines-worker-empty-plan-unable-to-reconnect-workspace/170591 "2026-09-04T13:28:39Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![DanielS](https://avatars.discourse-cdn.com/v4/letter/d/3ab097/32.png) [@DanielS](https://forum.cursor.com/u/DanielS)\
**Post date:** [September 4, 2026, 1:28pm UTC](https://forum.cursor.com/t/plan-mode-on-my-machines-worker-empty-plan-unable-to-reconnect-workspace/170591/1 "2026-09-04T13:28:39Z")

</div>

### Where does the bug appear (feature/product)?

Cursor IDE

### Describe the Bug

Plan mode on a self-hosted My Machines worker creates a plan title, then leaves the plan body empty (placeholder “Plan body…”, 0 to-dos). After the agent says “Created plan”, Cursor shows “Unable to reconnect workspace” / Disconnected.

The worker itself stays up. This looks like Cursor losing the plan window after the run, not the machine dying.

### Steps to Reproduce

1. Connect Cursor desktop to a self-hosted My Machines worker (`agent worker start`).
2. Open Plan mode on that worker (model: Cursor Grok 4.6 High Fast).
3. Ask it to write a plan (reproduced on “Strip migration wrappers” and a Mailchimp plan).
4. Wait until the chat says “Created plan”.

Result: plan editor has a title only; body stays empty; then Unable to reconnect workspace / Disconnected. Reload / Reconnect does not fill the empty plan.

Mailchimp run lasted about 9 minutes 13 seconds before the disconnect.

### Expected Behavior

After “Created plan” the plan editor should stay attached to the worker and show the full plan body plus to-dos. The workspace should not disconnect.

### Operating System

Windows 10/11

### Version Information

Cursor desktop on Windows 11. Exact About string not copied. Happens on current desktop against self-hosted My Machines workers.

### For AI issues: which model did you use?

Cursor Grok 4.6 High Fast

### For AI issues: add Request ID with privacy disabled

bc-91fb03fa-2bab-4b11-b4d6-e7e823f0dc12

### Does this stop you from using Cursor

Sometimes - I can sometimes use Cursor

---

<div class="post-metadata">

**Author:** ![Colin](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/colin/32/90452_2.png) [@Colin](https://forum.cursor.com/u/Colin)\
**Post date:** [September 4, 2026, 2:02pm UTC](https://forum.cursor.com/t/plan-mode-on-my-machines-worker-empty-plan-unable-to-reconnect-workspace/170591/5 "2026-09-04T14:02:50Z")

</div>

Hi @DanielS!

If our records are correct, your desktop is on Cursor 3.9.16, which is about ten releases behind. Please update to the current version (updating the CLI with `agent upgrade` is also a good idea) and let us know if you’re still encountering an issue!

---

<div class="post-metadata">

**Author:** ![system](https://sea3.discourse-cdn.com/cursor1/user_avatar/forum.cursor.com/system/32/99069_2.png) [@system](https://forum.cursor.com/u/system)\
**Post date:** [October 13, 2026, 10:35am UTC](https://forum.cursor.com/t/plan-mode-on-my-machines-worker-empty-plan-unable-to-reconnect-workspace/170591/8 "2026-10-13T10:35:52Z")

</div>

Closed on October 13, 2026, 10:35am UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
