Cursor does'nt install on Linux

Hello!

I ran into a problem when trying to install a cursor on Linux. This problem occurs in both Ubuntu and Arch Linux.

Here are the logs from the console:

libva error: /usr/lib/dri/i965_drv_video.so init failed
[main 2024-08-23T22:25:58.752Z] update#setState disabled
[main 2024-08-23T22:25:58.760Z] update#ctor - updates are disabled as there is no update URL
[main 2024-08-23T22:25:58.807Z] [storage state.vscdb] error checking size of src.vs.platform.reactivestorage.b
rowser.reactiveStorageServiceImpl.persistentStorage.workspaceUser: Error: Unexpected number of rows - 0
[main 2024-08-23T22:25:58.807Z] [storage state.vscdb] error checking size of workbench.panel.aichat.view.aicha
t.chatdata: Error: Unexpected number of rows - 0
[main 2024-08-23T22:26:00.298Z] [storage state.vscdb] error checking size of src.vs.platform.reactivestorage.b
rowser.reactiveStorageServiceImpl.persistentStorage.workspaceUser: Error: Unexpected number of rows - 0
[main 2024-08-23T22:26:00.298Z] [storage state.vscdb] error checking size of workbench.panel.aichat.view.aicha
t.chatdata: Error: Unexpected number of rows - 0

Characteristics of the main device:```
   ~/Загрузки  inxi -Fxz  INT ✘
System:
Kernel: 6.9.12-3-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
Desktop: KDE Plasma v: 6.0.5 Distro: Manjaro base: Arch Linux
Machine:
Type: Laptop System: HONOR product: BBR-WAX9 v: M1020
serial:
Mobo: HONOR model: BBR-WAX9-PCB v: M1020 serial:
UEFI: HONOR v: 3.15 date: 02/22/2022
Battery:
ID-1: BAT1 charge: 35.1 Wh (100.0%) condition: 35.1/41.6 Wh (84.5%)
volts: 12.9 min: 11.5 model: Desay HB4792J5ECW-31 status: not charging
CPU:
Info: quad core model: Intel Core i5-10210U bits: 64 type: MT MCP
arch: Comet/Whiskey Lake note: check rev: C cache: L1: 256 KiB L2: 1024 KiB
L3: 6 MiB
Speed (MHz): avg: 870 high: 4163 min/max: 400/4200 cores: 1: 4163 2: 400
3: 400 4: 400 5: 400 6: 400 7: 400 8: 400 bogomips: 33615
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel CometLake-U GT2 [UHD Graphics] vendor: QUANTA driver: i915
v: kernel arch: Gen-9.5 bus-ID: 00:02.0
Device-2: Quanta HD Camera driver: uvcvideo type: USB bus-ID: 1-6:5
Display: x11 server: X.Org v: 21.1.13 with: Xwayland v: 24.1.2 driver: X:
loaded: modesetting dri: iris gpu: i915 resolution: 1920x1080~60Hz
API: EGL v: 1.5 drivers: iris,swrast platforms:
active: gbm,x11,surfaceless,device inactive: wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.1.6-arch1.1
glx-v: 1.4 direct-render: yes renderer: Mesa Intel UHD Graphics (CML GT2)
API: Vulkan Message: No Vulkan data available.
Audio:
Device-1: Intel Comet Lake PCH-LP cAVS vendor: QUANTA driver: snd_hda_intel
v: kernel bus-ID: 00:1f.3
API: ALSA v: k6.9.12-3-MANJARO status: kernel-api
Server-1: sndiod v: N/A status: off
Server-2: JACK v: 1.9.22 status: off
Server-3: PipeWire v: 1.2.2 status: active
Network:
Device-1: Intel Comet Lake PCH-LP CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 00:14.3
IF: wlp0s20f3 state: up mac:
Bluetooth:
Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) driver: btusb
v: 0.8 type: USB bus-ID: 1-10:7
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: bt-v: 5.1
lmp-v: 10
Drives:
Local Storage: total: 268.36 GiB used: 208.25 GiB (77.6%)
ID-1: /dev/sda vendor: Micron model: 1100 MTFDDAV256TBN size: 238.47 GiB
ID-2: /dev/sdb model: Mass Storage Device size: 29.89 GiB type: USB
Partition:
ID-1: / size: 224.71 GiB used: 208.25 GiB (92.7%) fs: ext4 dev: /dev/sda2
ID-2: /boot/efi size: 299.4 MiB used: 296 KiB (0.1%) fs: vfat
dev: /dev/sda1
Swap:
ID-1: swap-1 type: partition size: 8.8 GiB used: 512 KiB (0.0%)
dev: /dev/sda3
Sensors:
System Temperatures: cpu: 44.0 C pch: 37.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 8 GiB note: est. available: 7.5 GiB used: 4.53 GiB (60.4%)
Processes: 276 Uptime: 33m Init: systemd
Packages: 1520 Compilers: clang: 18.1.8 gcc: 14.2.1 Shell: Zsh v: 5.9
inxi: 3.3.35

try the appimage, it works for me!

hey man
im running linux mint, and i installed the app image it worked so far, but the cursor/code command isnt installing/working. Any idea or fix would be appreciated